298 found, showing page 14 of 20
Halex 94107 Pull Elbow, 90 deg Angle, 3/4 in FPT x FPT, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL listed. Bulk packed.
Product Details
Angle:90 deg
Connection Type:FPT x FPT
Material:Zinc
Trade Size:3/4 in
Features
Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit
Removable cover provides easy access to facilitate wire pulling
View Details
$6.49
Halex 04012 Offset Nipple, 1-1/4 in, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
Product Details
Material:Zinc
Trade Size:1-1/4 in
View Details
$8.69
Halex 04020 Offset Nipple, 2 in, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved
Product Details
Material:Zinc
Trade Size:2 in
View Details
$12.99
Halex 58010 Service Entrance Cap, Clamp, Aluminum, 2.609 in H x 3.281 in W x 2.609 in D
PRODUCT OVERVIEW
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
Product Details
Connection Type:Clamp
Dimensions:2.609 in H x 3.281 in W x 2.609 in D
Material:Aluminum
Type:Standard Weatherhead
View Details
$9.99
Halex 64420 EMT Elbow, 90 deg Angle, 2 in, Steel, Galvanized
PRODUCT OVERVIEW
To connect EMT conduit together to allow for 90 deg bends. UL listed.
Product Details
Angle:90 deg
Finish:Galvanized
Material:Steel
Trade Size:2 in
Features
Use to connect EMT conduit together to allow for 90 deg bends
View Details
$22.99
Halex 26154 Conduit Strap, 1-1/4 in, Steel, 4/BAG, Galvanized
PRODUCT OVERVIEW
Indoor or outdoor applications. To support EMT conduit.
Product Details
Finish:Galvanized
Height:6.25 in
Material:Steel
Thickness:7/8 in
Trade Size:1-1/4 in
Width:7/8 in
View Details
$3.49
Halex 75402 Anti-Short Bushing, 2 in, Plastic, Red
PRODUCT OVERVIEW
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402 fits cable range of 12/4, 10/2, 10/3, 2/1. No 75403 fits cable range of 10/4, 8/2, 8/3, 1/1. No 75404 fits cable range of 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Product Details
Color:Red
Material:Plastic
Suitable for:10/2 10/3 2/1 Cable
Trade Size:2 in
View Details
$4.29
Halex 36019 Ground Clamp, 10 to 2 AWG Wire, Bronze
PRODUCT OVERVIEW
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
Product Details
Dimensions:2-5/16 in W x 2-1/2 in H
Material:Bronze
Wire Size:10 to 2 AWG
View Details
$8.99
Halex 27515 Cable Connector, Polypropylene, Gray
PRODUCT OVERVIEW
Push-in style with captive locking wedge. Rigid PVC. Excellent strain relief and insulation. In a dry location, use to secure #14 to #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 to #10/3. Fits 1/2 in knockouts. UL, CSA listed.
Product Details
Clamping Range:1/2 in
Color:Gray
Height:6.17 in
Length:2-13/32 in
Material:Polypropylene
Width:1-5/16 in
View Details
$2.39
Halex 75401 Anti-Short Bushing, 1 in, Plastic, Red
PRODUCT OVERVIEW
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402 fits cable range of 12/4, 10/2, 10/3, 2/1. No 75403 fits cable range of 10/4, 8/2, 8/3, 1/1. No 75404 fits cable range of 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Product Details
Color:Red
Material:Plastic
Suitable for:14/4 12/3 6/1 4/1 Cable
Trade Size:1 in
View Details
$3.79
Carlon UA7AJ-CAR Elbow, 2 in Trade Size, 45 deg Angle, SCH 40 Schedule Rating, PVC, Plain End, Gray
PRODUCT OVERVIEW
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.
Product Details
Angle:45 deg
Color:Gray
Connection Type:Plain End
Dimensions:2-3/8 in L
Material:PVC
Schedule Rating:SCH 40
Suitable for:Non-Metallic Solvent Weld Fitting
Trade Size:2 in
View Details
$5.69
Carlon LN20DA-CTN Liquidtight Elbow, 1/2 in Trade Size, 90 deg Angle, PVC, NPT, Gray
PRODUCT OVERVIEW
For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.
Product Details
Angle:90 deg
Color:Gray
Connection Type:NPT
Material:PVC
Trade Size:1/2 in
Features
Unique design, the simple one-piece body requires no disassembly of components for installation
The system is so strong that there is no need for a compression nut
PVC construction of the fitting and locknut provides unparalleled protection from water, oil and dust
Non-conductive and will not corrode or rust
View Details
$3.79
Carlon LN20EA-CTN Liquidtight Connector, 3/4 in NPT, PVC, Gray
PRODUCT OVERVIEW
For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.
Product Details
Color:Gray
Connection Type:NPT
Material:PVC
Trade Size:3/4 in
Features
Unique design, the simple one-piece body requires no disassembly of components for installation
The system is so strong that there is no need for a compression nut
PVC construction of the fitting and locknut provides unparalleled protection from water, oil and dust
Non-conductive and will not corrode or rust
View Details
$4.99
Carlon LN20FA-CAR Liquidtight Connector, 1 in NPT, 2.58 in L, PVC, Gray
PRODUCT OVERVIEW
For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.
Product Details
Color:Gray
Connection Type:NPT
Length:2.58
Material:PVC
Trade Size:1 in
Features
Unique design, the simple one-piece body requires no disassembly of components for installation
The system is so strong that there is no need for a compression nut
PVC construction of the fitting and locknut provides unparalleled protection from water, oil and dust
Non-conductive and will not corrode or rust
View Details
$12.99
Carlon LN43DA-CTN Conduit Connector, 1/2 in NPT, 1.79 in L, PVC
PRODUCT OVERVIEW
For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.
Product Details
Connection Type:NPT
Length:1.79 in
Material:PVC
Operating Temperature:140 deg F
Suitable for:Carflex Conduits
Trade Size:1/2 in
Features
Unique design, the simple one-piece body requires no disassembly of components for installation
The system is so strong that there is no need for a compression nut Non-conductive and will not corrode or rust
View Details
$2.59
